i need the barrel&breach dimensions for the 25. cal
I need the inside and outside dimension for 25. Barrel at the breach end thanks
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Thanks for the info ill give it a try just haven’t messed with the .25 cal so didn’t want to make any mistakes ill post some pics of some of my creations soon
Brad, use the 0.312″ for the breech with about 0.005″ clearance.
Allows you as Vince says to use the standard breech.
On mine the skinny barrel has been no problem at all as there really is no load on it in any lateral directions.
Good to see you posting and would like to see pics and results of what you are up to eh?:)
Walter….
I can say from my experience venting collars for my two .22 barrels (12″
& 24″) that their ODs ARE different – and they’re the same caliber!
That is what I originally thought but it just looks like there wouldn’t be much meat left to keep it from bending
Selphb – i have no idea what I am talking about, But would it not be the same as the other barrells.
So, you should be able to take them off your old barrell – the dimensions.
Only a guess on my part.
Fatman
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Brad, you get the .25 hopping and you will love it.
Send me your mail addy and I can send you some of the bullets I swage to try out.
Walter….