30-35fpe
Is it possible to get 30 to 35fpe out of my Talon SS without changing the 12inch barrel? What would be the best/easiest way to do it?
All Replies
Viewing 12 replies - 1 through 12 (of 12 total)
I wouldn’t say It’s alot of work or patience as long as you have the right tools for the job. Don’t forget to vent your front bushing and drill some ventings on the rifle frame – Under the front grip Is a good spot If you want them to be hidden.
Easiest to get to 30s in 22 cal is the high flow tank as mentioned but you can do it with your current SS valve but it will take work and a lot of patience. With the big valve you can get to 50s but again a lot of work.
Thanx for the info 271867. I think I’ll go for that set up.
i get about 25 good shots at full power starting at 2700 psi then i get down to like 2200 psi. i can shoot more than 25 shoots with it but i its going to be around 20 ft lbs , mine is a stock condor well was before i sent it to tony this week
So a condor bottle and hamer will do the trick. And how much usable shots do you get? Cause my Talon SS starts at 21,5 fpe and 30 shot later still 20 fpe (that’s whitout any mods). I think the guy with +50fpe has a .25
Anybody any other suggestions?
Gert
Someone has posted over 50fpe? Can’t remember the dude but I think I seen that.
easiest way would be to get a high flow tank and a heavier hammer. i have a condor with a 12inch barrel i get 30 ft lbs with jsb exacts shooting at 950 fps, 35 ft lbs shooting kodiaks at 870 fps, and i get 40 ft lbs shooting 28gr eugins at 800fps
It’s possible, Even getting close to 40 – perhaps even more providing you have the parts and use the right slugs but shot count will be very low.
Check here
So 30fpe in .22 and 12inch isn’t an option?
You could try a 12″ x 25cal barrel, hi-flo tank and a heavier hammer. 😀
But what do I know? I’m a low-medium power shooter////
Viewing 12 replies - 1 through 12 (of 12 total)
- You must be logged in to reply to this topic.
So a condor bottle and hamer will do the trick. And how much usable shots do you get? Cause my Talon SS starts at 21,5 fpe and 30 shot later still 20 fpe (that’s whitout any mods). I think the guy with +50fpe has a .25
Anybody any other suggestions?
Gert
The fastest and easiest won’t be the cheapest or
as fast as you would like it to be but
The fastest and easiest without a doubt would be to
call Talontunes and discuss letting Tony tune it
for you…..If he can’t do it, it can’t be done….
The seperation anxiety will be brutal but well worth it…
And there will be no doubt that it is done right the first time….