CONDOR .177 SHOT STRING
Beeman silver arrow 11.1 – 11.2 , .177 pellets , 2000 PSI fill , P.W. on 1 . Top hat at .067 TWo 25 shot strings , one fill .
String 1 – 1024 , 1006 , 1012 , 1015 , 1037 , 1048 , 1042 , 1056 , 1044 , 1063 , 1036 , 1059 , 1066 , 1053 , 1068 , 1066 , 1043 , 1067 , 1066 , 1059 , 1061 , 1054 , 1057 , 1060 , 1052 , average 1049 fps .
String 2 – 1053 , 1049 , 1046 , 1039 , 1038 , 1035 , 1037 , 1033 , 1031 , 1018 , 1021 , 1019 , 1017 , 1014 , 1008 , 1007 , 1000 , 1000 , 989 , 988 , 983 , 982 , 975 , 973 , 968 , average 1013 fps .
Average of 50 shots 1031 fps . Marvin
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
what is the size of your barrel?
i use a 18″ .177 barrel with my HPA tank setup.
Sam this should do it for you . The weight is between the spring and the st
riker which is not on the talon and why it is not mentioned here .The set screw is also the pointer . Marvin
http://talonairgun.com/forum/viewtopic.php?t=204
Ok. Thanks Marvin. Next question, How hard or easy is it to remove and reinstall the hammer weight?
Sam the higher the fill rate the higher the fps went . So I stopped because I do not like or want the high fill rates and I have the Condor tanks for full power . There again as far as adjustabllity with the power wheel I never moved it from low because the fps ratings were so high already . I bought the talon tank in hopes that the shot count would go way up for short distance target work . But it did not yeild that much better over the condor tank . In fact if my memory is correct the condor tank with out the stricker weight yeilded a higher shot count . I have thought about trying a .177 condor valve spring in a talon valve but I dont think that will happen real soon . Or if some one else has done it I would like to know what the results were . Marvin
http://www.gatewaytoairguns.com/airguns/forums/thread-view.asp?tid=13228&posts=6&highlight=condor%20minis%20striker%20weight%201300%20&highlightmode=1#M117255
Marvin what happens if you use your talon tank with the condor set up for the hi-flo tank? Do you just lose all adjustibility?
Tony that was with a Condor tank . I have not gone lower that 1800 psi fill . This link will show you why . Also if you do a search on this link or just go back several pages you will see a lot of chrony readings I have done with a talon tank as well as a condor tank with the striker weight removed . I hope I have not broken any rules by providing this link here if so befor I get banded please remove it and e -mail me and it will not happen again . I did not see it listed in the forum rules .Marvin
http://www.gatewaytoairguns.com/airguns/forums/thread-view.asp?tid=12001&posts=4&highlight=condor%201800psi%20fill&highlightmode=1#M94500
String 1 – 1024 , 1006 , 1012 , 1015 , 1037 , 1048 , 1042 , 1056 , 1044 , 1063 , 1036 , 1059 , 1066 , 1053 , 1068 , 1066 , 1043 , 1067 , 1066 , 1059 , 1061 , 1054 , 1057 , 1060 , 1052 , average 1049 fps .
String 2 – 1053 , 1049 , 1046 , 1039 , 1038 , 1035 , 1037 , 1033 , 1031 , 1018 , 1021 , 1019 , 1017 , 1014 , 1008 , 1007 , 1000 , 1000 , 989 , 988 , 983 , 982 , 975 , 973 , 968 , average 1013 fps .
Average of 50 shots 1031 fps . Marvin
Interesting, is that with a Condor bottle or Talon? Could you see what it does with say a 1600 psi fill? How was accuracy?
Regards,
Tony
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
24 inch .