Please help chrony problem
Please help chrony problem
Hi
I need some help please
Am using f1 chrony here is the problem
The muzzle is at 12 yards away from the chrony I have used it closer indoor out door is the same
If I shoot 2 inches above the sensors it will display 850 if I raise to 4 inches it will display 900 and if I raise to 8 inches it will display 1000 and so on so what is going on and if this is normal where is the right place to shoot how many inches up from the sensors
Thanks in advance
rj
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
Be sure it’s fully open. What you describe can be caused by this (shorter path between the traps if they’re not parallel).
Doug Owen
Have your tried starting high and lowering it? Maybe your gun is actually increasing in speed. Thats how mine was before I messed with the top hat. I was easily seeing 80fps jumps in speed between shots.
Make sure while indoors you are not using florescent bulbs and have the lights perfectly over the sensors.
Out side use the sun shades. Also if the light is coming in at an angle from the sun it will give wrong readings.
I never heard of this problem before. Are you sure your shooting perpendicular to the sensors?
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Out side use the sun shades. Also if the light is coming in at an angle from the sun it will give wrong readings.
inside i will try it out side when i get the time thanks
rj