All Replies
Two TalonSS, One with Talon Tunes 14″ .25 Cal. bbl, plus 12″ .20 cal AF bbl. Number 2, 12″ AF .22 cal. bbl. and 12″ .177 cal… I wanted to keep the barrels inside the shroud to keep them quieter. It works. Tony did a good job on the .25 cal barrel. I get 720 – 750 fps with a standard SS tank and PW on 8.5 (3000 psi fill)… Oh and that’s with Kodiak 31 grain pellets. We have a coyote roaming my northern Las Vegas suburb. One of these nights I’m going to get him… 😈
Talon SS with
-18″ hand lapped barrel
-Condor valve in tank slightly tweaked
-C-2 surefire with custom 250 Lumen LED with heat sink from Light
Hound and touch pad mounted under the bbl.
– Pellet holder.
-trigger stop
-Zeiss 4.5×14 50mm with side parallax adjustment with Mil-Dot ret.
Just got the new Zeiss, Man it’s great!
😀 -custom 8″ LDC by Lovett Custom Knives
There should probably be a combination offered in the poll.
Mike
Talon SS With
– Tasco Varmint Illuminated 2.5-10×42
– 12″ .22 & 24″ .25 Barrels
– Blodnob Valve
– Modified Breech to accomodate Valve
– Talontunes vented bushings
– My own baffled endcap or shroud depending on Barrel
– Foxbat AR 15 Grip
– Morgan adjustable buttpad
– Stainless Steel set screws
– Stainless Steel Trigger Pins
How’s the balance when shooting off hand with the extra weight of the bipod?
Thanks, so far so good, I’ve only had the 12 incher on it for a day now and only had time to ran 1 tank of air through it, but so far I’m liking it a lot. I’m use to hunting with the 24 incher and a full shroud so it’s feeling a bit light in the front end to me, but I’ll be use to it in no time.
Talon SS in 177. I’m keeping the 177 barrel in it for another 2000 pellets, once they are gone, I might go back to the 22 cal barrel, but I might not, geez I don’t know what to do. 😕
Air or CO2, may be a little of both.
That’s a SWEET ride there Blue.
How’s the balance when shooting off hand with the extra weight of the bipod?
I’m the proud owner of a TSS Annuzzi Special (I got the works!):
2 – 18″ bbls .177 & .22
2 – Tanks, one restrictive (to help stymie overpenetration)
.22 Airhog condor
RWS 30mm high rings
SWFA Hakko/tasco SS 10X42 mildot Japan!
Stock Condor
talon ss modded out to be a condor with big balls
modded hiflo valve, custom weighted hammer,vented busings and frame and 24 in bbl in .22 cal
.25 tony tuned condor
and 1 .22 talon SS
Based on serial number, a Talon SS.
But it sure as hell doesn’t look like one! 😆
condor ss
Stock .22 Condor.
Condor
- You must be logged in to reply to this topic.
-18″ hand lapped barrel
-Condor valve in tank slightly tweaked
-C-2 surefire with custom 250 Lumen LED with heat sink from Light
Hound and touch pad mounted under the barrel.
– Pellet holder.
-trigger stop
-Zeiss 4.5×14 50mm with side parallax adjustment with Mil-Dot ret.
Just got the new Zeiss, Man it’s great!
😀 -custom 8″ LDC by Lovett Custom Knives
There should probably be a combination offered in the poll.
Mike
I thought about it Mike, but I felt there were too many combinations possible. That’s why I just went with the more than one option. which, btw, surprises me how many people have more than one.