What do you guys have your Top Hat’s set up in your Condor’s

.078 on mine.

Just a note… but Top Hat setting data is useless without other information…

PW setting, you’ve already mentioned.

Fill pressure is another key component as well as the hammer weight.

So…

If we are to create some sort of database here we will need

TH setting
PW setting
Fill pressure
Hammer weight

…but…
then you have variables such as tolerance issues, has anything been polished, etc, etc.

Not trying to discourage anyone, just being realistic.

My condor has been factory stock for almost 2 years. allways been very loud on hpa. Co2 very quiet compared to hpa. Soo decided to adjust the tophat to save some air. Normally I set power level at 4.0 being only able to use Kodiaks or Eun Jins. All other go super sonic. and very loud.

Needed to be able to Reset back to factory so found a 1/8 allen wrench fit perfectly between the tophat and valve. .125 factory gap.

Turned the tophat one turn towards valve. Need to borrow calipers from shop to measure gap. will let you know in a day or two?

Set power wheel to 2.0 Fill to 2600 psi Stock hammer .22 24″ HI FLO

Results. Don’t have a chrono. About maybe half as loud as stock. Seems a bit more accurate. Not as much fps as stock. Shot some Beeman Trophy, Ramjet and Kodiaks JSB, jumbo express All ok. RWS superdome went wild about 6″ spread. this was confusing because superdomes were great with co2.

Seems to bring in about 30 good shots now.

Sam 😕