Q:

night light

I ordered a NC Star tactical light for my condor. Fits weaver or picatinny style rails. I will ley you know how it fits and works when I get it. Sportsmens Guide 36$

Optics/Nightvision

All Replies

Viewing 9 replies - 1 through 9 (of 9 total)

will look for something laying around and use the adapter if I have too. thanks all again a wealth of information

I can see no reason why a scope ring won’t work. I have the sure fire in a 1″ rim fire ring, and the Fenix T-1 in a 30mm ring. Works just fine. And a heck of a lot cheaper! 😀

quote Viper757:

I have ordered one of these and it should work for you.

http://www.pyramydair.com/s/a/RWS_850_AirMagnum_Scope_Rail_Weaver_Picatinny_Rail/930

Thats what i have – bear in mind that it will not fit the top rail without modification and the bottom rail has a ridge running along – You’ll need something to put in there to do it right – I cut my rail in half, milled out the middle to use half on the top and used rolled brass strip to fill in the channel on the bottom for better holding strength.

There are pretty nice weaver adapters on ebay, for much less $. I just bought two to replace the 850 rail I had.

http://cgi.ebay.com/UAG-3-8-DOVETAIL-TO-7-8-WEAVER-RAIL-ADAPTER-MOUNT-M3_W0QQitemZ390044096840QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item390044096840&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

I have ordered one of these and it should work for you.

http://www.pyramydair.com/s/a/RWS_850_AirMagnum_Scope_Rail_Weaver_Picatinny_Rail/930

Thants the one, I guess I will check for the adapter.

Is it this one?

http://www.sportsmansguide.com/net/cb/cb.aspx?a=486580

If so, your out of luck on using a scope ring – your gonna need a weaver/dovetail adapter.

Like this –

Funny, something made me ask… 😆

Pyramid sells one, or you can go to Ebay and do a search for “dovetail to weaver” for other models/options.

OR, if the light isn’t permanently attached to the mount it comes with and it has a 1″ tube, you can use a scope ring that has a dovetail mount and skip the adapter altogether.

I did not know that. I figured it was a picatinny rail. I guess I figured wrong. LOL I will figure it out I guess.

You do know that you’ll need an dovetail-to-weaver adapter to mount it on the gun, right?

Viewing 9 replies - 1 through 9 (of 9 total)

  • You must be logged in to reply to this topic.