I removed safety, now gun won’t cock everytime
Me and a friend removed the safety from my SS polished trigger sear lightly and molyed all parts and now it won’t cock everytime. It seems like its a balance of getting the grip and foward screws just right (kind of loose) for it to cock. I feel it should be tight for it to work and not come loose. He stretched trigger springs slightly and it seemed to help some. My friend is good at working on airguns and also did the same thing to his SS that he used to have. Any help?
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
Have you tried a using a small washer?
Where at?
Just the trigger was polished, don’t think it was cut much at all.
May try removing moly.
Which forward screw are you talking about? If the bolt to the trigger guard goes into far the gun will not cock. So put a little washer under the bolt head and give it a try.
Have you tried a using a small washer?
Where at?
Just the trigger was polished, don’t think it was cut much at all.
May try removing moly.
Have you tried a using a small washer?
you polished the sear engagement to a rounded profile?
do not use moly on trigger sear surfaces
buy new trigger bits from airforce
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Where at?
Just the trigger was polished, don’t think it was cut much at all.
May try removing moly.
Which forward screw are you talking about? If the bolt to the trigger guard goes into far the gun will not cock. So put a little washer under the bolt head and give it a try.
Yes, thats the bolt I was referring to. I’ll give it a try, thanks.