How do you change a Talon valve into a Condor valve?
I have the parts and the old dong valve that is worthless.
I wound up getting a set of new parts for a condor valve, but do not know how the Talon valve disassembles.
I have removed everything from it, except the piece on top that looks like it screws in on the Condor valve and has 2 cut outs for what looks like you would use a pair of ring removers, however, the Talon valve does not have the cut outs, so not sure how to remove it
All Replies
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.
Not sure exactly what you are looking at, can you take pictures?
But here’s a quick breakdown of the breakdown. 🙂
First, empty the bottle and take the valve off the bottle. Now, if you look at it with the tophat pointed up, look at the bottom and you’ll see a nut looking thing. It’s just screwed in, so get something and unscrew it, it will pull out and there is a spring in there that should also come out. Then, to get the tophat off, take a flathead screwdriver, and put it between the tophat and the valve body. Gently twist it and the tophat and stem should come out of the top, and a derlin piece should fall out of the bottom.
I think that’s it.