Q:

Anyone see this video with modded ss shooting 31 gr wasp mag

pellets??? What do you think of these pellets? Does 1200 fps with 31 gr pellets sound right?

http://www.youtube.com/watch?v=PUVWBk5QMeQ&feature=fvw

Talon/Talon SS

All Replies

Viewing 8 replies - 1 through 8 (of 8 total)

This cat has a few cool vids.. the one hitting the CD’s at 200 was cool….serious power on a talon here….wonder shot counts??? I recently used shark hollows in .22 (courtesy of Zombieheadhunter) that has the bullet shaped profile like Wasps but not as heavy with hollow point in my C02 powered LD that hits 500 ish…. stupid penetration and expansion…I could image at 1200 with 31 grains with solid tip the penetration on that….must be like being on da real Cronic!!!! I used to be a skeptic of AF guns until I shot a Condor….then one day a Talon appeared in my hand$….

The guy is not a bullshitter and he is a member of this forum. I asked him to tell me what was needed to produce that power and he was kind enough to send me detail photos of the valve and everything else that was modified.

test

Conicash or w.e.t.f. his name is, has some other videos and I think he is pushing the limits of power, he said he put a stronger spring in the valve, and with alot of pressure, he has to be knocking the hell out of the valve, but with what. http://www.youtube.com/watch?v=Yf8kQFLMlWg You can hear the crack in this one.

quote Jerry:

Lang,
Your either deaf or gonzo! You might want to shoot near a hill as the echo delay will give you time to recover from the firing blast and enjoy the crack….the pellet crack that is! 😆

either that or your

quote Langnasen:

chrony is busted. 😆

I don’t know if THAT guy did it for sure but it is very doable and I’ve seen it done and faster.

Lang,
Your either deaf or gonzo! You might want to shoot near a hill as the echo delay will give you time to recover from the firing blast and enjoy the crack….the pellet crack that is! 😆

Very do-able if the tank pressure is very high(3200 psi) and you use a hammer and spring able to open it.Plus a 24″ barrel…
I feel confident that if I filled to that kinda pressure, I could do that with a Blod valve, and I’m VERY sure a Lang valve could do that..

I saw a 1280 with a 31gr Kodiac, but as there was no sonic crack (that I noticed) I figured it was an erroneous reading. But I had plenty of very high 1100s.

Guy in the vid claims he’s opened out what looks like a stock stem to 5.5mm. I think maybe his chrony is busted. 😆

Viewing 8 replies - 1 through 8 (of 8 total)

  • You must be logged in to reply to this topic.