Visit Talon Tunes
Updated on September 17, 2009
langnasen
Participant
September 17, 2009 at 3:06 pm
Q:

Annuver silencer, innit.

I ordered two pieces of alum tube, both 2.5m long, one at 1 3/4″ the other at 1 5/8″, the smaller needed a tad off the OD to nest inside the larger. Wall thickness on both is 1.5mm. Cut some bulkheads from the smaller and some delrin baffle-washers, two end-caps force-fitted into each end, total length about 500mm. Job’s a good’un, quieter than the first (as in all I can hear now is the hammer hitting the breech). Pics later. 😀

Shrouds and Moderators

All Replies

Viewing 9 replies - 1 through 9 (of 9 total)

langnasen
Participant
September 18, 2009 at 8:57 am
quote maw:

I would say camo is in order.

That got done already. 🙂

maw
Participant
September 18, 2009 at 3:00 am

I would say camo is in order.

langnasen
Participant
September 17, 2009 at 5:10 pm
quote ACFguy:

Is that the carbine version? 😀

Yes, but only for very tall people.

acfguy
Participant
September 17, 2009 at 5:00 pm

Is that the carbine version? 😀

mamcrackin
Participant
September 17, 2009 at 4:06 pm

No that my friend is a friggin silencer…..You could hush a BMG with that
thing…Nice…..

You weren’t working, you were caring for your pot plants….I see the
evidence…You can’t fool me…

langnasen
Participant
September 17, 2009 at 4:04 pm

I was running, real fast… 😆

mamcrackin
Participant
September 17, 2009 at 3:47 pm
quote Langnasen:

quote mamcrackin:

quote Langnasen:

I ordered two pieces of alum tube, both 2.5m long, one at 1 3/4″ the other at 1 5/8″, the smaller needed a tad off the OD to nest inside the larger. Wall thickness on both is 1.5mm. Cut some bulkheads from the smaller and some delrin spacers, two end-caps force-fitted into each end, total length about 500mm. Job’s a good’un, quieter than the first (as in all I can hear now is the hammer hitting the breech). Pics later. 😀

Come on with the pics already….

I’ve just been milling the ends off the tri-rails (about 10mm), as they stick out further than the end of the frame and were stopping the silencer from butting-up against it nicely. Almost done, just have to drill a little hole into the frame-cap end of the silencer to take the grubnut that secures it into the frame.

Oh….Ok……..Bloody hurry up would ya…..

langnasen
Participant
September 17, 2009 at 3:46 pm
quote mamcrackin:

quote Langnasen:

I ordered two pieces of alum tube, both 2.5m long, one at 1 3/4″ the other at 1 5/8″, the smaller needed a tad off the OD to nest inside the larger. Wall thickness on both is 1.5mm. Cut some bulkheads from the smaller and some delrin spacers, two end-caps force-fitted into each end, total length about 500mm. Job’s a good’un, quieter than the first (as in all I can hear now is the hammer hitting the breech). Pics later. 😀

Come on with the pics already….

I’ve just been milling the ends off the tri-rails (about 10mm), as they stick out further than the end of the frame and were stopping the silencer from butting-up against it nicely. Almost done, just have to drill a little hole into the frame-cap end of the silencer to take the grubnut that secures it into the frame.

mamcrackin
Participant
September 17, 2009 at 3:12 pm
quote Langnasen:

I ordered two pieces of alum tube, both 2.5m long, one at 1 3/4″ the other at 1 5/8″, the smaller needed a tad off the OD to nest inside the larger. Wall thickness on both is 1.5mm. Cut some bulkheads from the smaller and some delrin spacers, two end-caps force-fitted into each end, total length about 500mm. Job’s a good’un, quieter than the first (as in all I can hear now is the hammer hitting the breech). Pics later. 😀

Come on with the pics already….

Viewing 9 replies - 1 through 9 (of 9 total)

  • You must be logged in to reply to this topic.