All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
People like you make this site great! Thanks again! I just purchased it.
Yeap.. I think Tim at MAC1 can machine a one piece too.
http://www.pyramydair.com/s/a/Quick_Disconnect_Male_Adapter/596
You are right, but I don’t know if the threads on the clamp are 1/4 or 1/8″. If you have more than one PCP and want to keep the hose, just get a male quick connect for the AF adapter and you can swap it out quickly as needed.
The threads are 1/8. So I would buy a 1/8 male quick dis. to place on the back of the adatper. I never even thought of that. Thanks!
You are right, but I don’t know if the threads on the clamp are 1/4 or 1/8″. If you have more than one PCP and want to keep the hose, just get a male quick connect for the AF adapter and you can swap it out quickly as needed.
is the AirForce 1/8″ and 1/4″ BSPP Refill Adapter set. I have a KingMan Scuba tank adapter and hose so I am thinking that the adapter will fit when I unscrew the hose. Am I wrong on this one?
StraightShooters, MAC1, and AirHog are some of the reputable dealers.
http://www.straightshooters.com/air%20force/afu1012scubaadapteryellow.html
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
test