Condor spacer indstead of power wheel!
I have had my Condor for a year or so been shooting it and getting very good advice here on the forum, my question is I see several using spacers in place of the power wheel once they figure out where they want it set. How do you go about figuring out what size spacer O.D I.D and width and what material is best to use and how is the spacer held in place thanks Eddie
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
Delrin is the best material. OD to fit inside the frame just so, ID big enough to go over the barrel!
You gonna want a selection of spacers ranginging from 1mm up to 10mm in thickness.
Trial and error to find best preload.Hammer length is taken into account. Start with about 3 inches of combined hammer and spacer, and go from there. More preload and less hammer weight seems to offer good hammer strike consistancy. I use 50 gram hammer and combined hammer length and spacer of 3.070″
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Thanks Pab sounds like a good plan