anti tamper?
hello lads needing a bit of advice.. there seems to be a anti tamper on the belly of the stealth that holds the first barrel bush. any advice on how to take this out? will it just be a screw with its head cut off ?
thanks
jonty
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
mate if i could i would 🙁
move to the U.S. were there don’t play them lame assed games :14
I just sorted this out on one of my guns.
A mate has a pillar drill and we used progressively larger drill bits, starting quite small, and drilled the bolt out. We weren’t able to save the thread so once we got the barrel out we re-drilled the hole and re-threaded it for M6 as we happened to have some M6 grub screws – we could maybe have done M5 but would have meant sourcing some.
When the bolt had been drilled out so there was practically nothing left of it we used a bit of suitably sized steel pipe like a slide-hammer from the rear end after taking the bottle securing ring out, tapping it against the barrel bush as it was being held in place by the very thin remains of the bolt.
I hope that made sense.
In theory you could use an “easy-out” screw extractor once you have drilled a big enough hole in the bolt as the heat of drilling it will have loosened the locktite threadlock but we didn’t have one small enough so resorted to completely drilling the bolt then re-threading to suit the different sized grub screw.
thanks alot mate that was so helpful it is so much clearer now silly me 😯
Jonty, my wife loves in you in Cash in the Attic !
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
[quote=”Flannelmeister”] thanks alot for the info mate realy helpt