Sony Handy Cam/ Nikko 10-50×60 diamond adapter
Here are some pics of my adapter that i had to modify. After switching to the nikko I had to make it longer for proper eye relief. It is made up of (2) 1.5″ couplers and I believe (3) 1.25 – 1.5″ bushings. (I not 100% sure because part of it is painted and made a while ago). Also needed are some cheap 37mm lens filters. My filters fit in the bushing nicely, I used 2 so they would be deep enough to stick out of the adapter. I broke the glass out of them.I had to do some reaming to get the bushing to slide over my eyepiece. I hope the pics are enough because I didn’t write this down as I went. I will gladly answer any questions the best I can. It is pretty simple to figure out if you bring your filter, and scope to the home depot. test everything before gluing together to make sure its spaced right. You should be able to do this with any scope (slight modding of course) and any camera that you can get threaded filters for.
Here is what a video looks like with it. This is pre ,tony tuned .25 and nikko. i have posted this video before but figured it would give you an idea if you think its worth it.
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.






F.F. Where have you been? Assman that rabbit shot was schweeeet!