Is there a warranty on the AF CO2 adapter?
My CO2 adapter went from working great to 230 fps seems the stem is stuck down doesn’t compress freely???
Randy
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
i had the stem of my first co2 adapter pop out. called airforce directly they sent me a new one, i then sent them the old one in the same packaging. only thing it cost me was about 6 dollars shipping.
airforce airguns phone#
1.877.247.4867
good luck!
steve
Shoot mamcrackin a PM, he went through this a few times…
Well guys the friggin stem is broken!!!
Any ideas??
Randy 😥
Pellgunoil is made by crosman specially for co2 rifles to rejuvenate O-rings. Daisy owner’s manuals recommends 30 weight non detergent motor oil use in their Co2 guns….?
Co2 will dry rot O-rings. Some O-rings will absorb Co2, and swell or self destruct. Co2 use with no maintenance/lube guarantees leaks.
My RWS 850 had an O-ring self destruct, and completely disappear. Had to disassemble and replace that missing O-ring. After that I used Dexron III ATF for lube with no problems. Since changed to Pellgunoil. My 850 will leak if not lubed once a month.
If you switch to HPA, It’s a good idea to clean the Co2 lube out first.
Sam 🙂
Use some pellgun oil or 30 weight non detergent motor oil. If the seals get dry it will leak and not seal. Put a big drop of pellgun oil on the pin of the Co2 tank valve, to blow through the Airforce Co2 adapter.
Or pour some pellgun oil into the back of the Co2 adapter and cycle the top hat, in and out until the oil works all the way through.
Sam 🙂
I dunno about that… blowing Pellgun oil or engine oil through your gun is going to raise hell with your o-rings.
I think silicone-based lubes are more appropriate for this task.
Yes, there is a warranty on the Co2 adapter, call Airforce to return for warranty service?.
Use some pellgun oil or 30 weight non detergent motor oil. If the seals get dry it will leak and not seal. Put a big drop of pellgun oil on the pin of the Co2 tank valve, to blow through the Airforce Co2 adapter.
Or pour some pellgun oil into the back of the Co2 adapter and cycle the top hat, in and out until the oil works all the way through.
Sam 🙂
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
Rachel emailed me with an RMA number said she will take care of it, now I know why I chose AF they care about their clients can’t say the same for other AG companies!!!
Randy