Broken Cocking Knob (little help)
So I was shooting my Condor today and the cocking knob broke off on me. The problem I’m having now is I can’t get the air bottle collar off to remove the breech.
I removed the set screw that holds the collar on and reattached the bottle to get a grip on it, but it won’t budge. Any advice would be great.
Thanks,
Ryan S.
All Replies
You could order a new customize coking knob from 80grit
There’s a banner ? where?
Banner? 😕 Where? 😯
😆
what banner?
Yes, but Im not sure he got from Tony.
like the one on the talontunes banner?
like the one on the talontunes banner?
like the one on the talontunes banner?
like the one on the talontunes banner?
😆
like the one on the talontunes banner?
like the one on the talontunes banner?
I was just cocking the gun with my thumb and it snapped off. Now I have to try and tap it out so I can put the stock one back on.
Im the second owner the first guy had an aftermarket knob on it (silver looking one with 3 black O rings).
How did you do this i mean breaking the cocking knob.
That was the trick i needed!!
Thanks Guys.
do it like Lama said take out the power wheel plastic allen bolt head first when you put it back in don’t tighten it up much use a small drop of “blue” loctite on the threads and use the long end of the allen wrench and don’t use a ball end allen wrench just asking to stirp out the head if you use one of those and turn it in until it stops no more all that screw does is serve as a pointer nothing else! next take out the four grub screws one is under the forend grip slip out the barrel just watch how things come out the barrel is pretty straight foward the last barrel bushing to come out will have a small thin rubber washer on it just remember that when you put it back in should stay put pretty much! tip the front of the gun down and the hammer will fall out pull the trigger and sometimes you have to push in on the safety and your breech should come out sometimes you have to play around with that to get it out take your air bottle off if you haven’t allready should have mentioned that if the breech gets stubborn just take a dowle rod of something round I use a carbon archery arrow I have them usually handy LOL and just push the rod through where the bottle was screwed in and the breech will come right out do this while pulling the trigger and pushing in on safety then you can repair your broken breech. If any part of the breech cocking knob is out past the breech you should grind it off maybe a dremel tool or something or it probably won’t come out also it would scratch up the inside frame if anything was sticking out of the breech. I put a brass insert in my breech there is a post in Quick Ref on someone doing that and explaining how if you can’t find it pm me I will send you what you need to do that kind of a nice mod threads tend to strip out of the delrin breech sometimes hope you understand what I said any question fire away I mean ask LOL 😆
If you have a safety you have to pull the trigger, depress the safety, and then push the breech out.
- You must be logged in to reply to this topic.
like the one on the talontunes banner?
like the one on the talontunes banner?
like the one on the talontunes banner?
😆
Forgive me i was using a psp