Will a discovery air tube fit the 22xx breech and…
…trigger frame????
If so, do they “bolt right up” or are mods necessary and if so, what???? Thanks for your help!
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
Walt,
Thanks for the info. Yes, I would be using a Disco valve in this particular instance.
No, I did not sell you that. I have only been into this sport for a year now. I used to be into it as a kid, but not as an adult until a year ago 😳 🙁 Man, I didn’t know what I was missing!
Joe, if you have a receiver with the rearward mounting screw OR drill and tap the tube for the forward screw location everything else works fine.
If you elect the rear screw then thte hammer needs a notch to clear that screw.
Will you be using a Disco valve and fill?
Darren of Pacific Pellet guns is the Disco conversion guru. IIRC he posts on the yellow and the green.
BTW did you sell me a Corbin swage .257cal a number of years back?
Walter….
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Since we’re on this topic 😆 Is the breech on the Disco the same as the 22xx, I think yes, but I defer….
Would an MROD shroud fit on a discovery with an aftermarket high rise breech???
And what would an MROD breech, tube, barrel, and shroud mate up to the easiest in pistol format????
I’m getting ready to order a bunch of stuff from crosman so I need to know 👿 😈 😡 ❗
Thanks a bunch!