Q:

.25 condor barrel length?

if i installed a .25 barrel on a stock condor, what kind of FPS ranges should i expect from each barrel? barrel lengths from 12″ to 24″, using beeman kodiak pellets.

thanks, md308

Airforce Rifles/Pistols

All Replies

Viewing 10 replies - 1 through 10 (of 10 total)

What Pab Said! 😉

quote md308:

thanks guys! so does the 1000fps range sound about right for an 18″

Yes, but you may want to try and slow it down a little as the Kodiaks shoot best between 900 and 950 fps.

thanks guys! so does the 1000fps range sound about right for an 18″

All things the same my condor got 15 fps per inch of barrel I have a 12″ 18″ and 24″

So, for each 1 inch increase in barrel length you’d get in the neighborhood of 16 psi increase??

Whatever speeds you were getting in your .22 barrel with kodiaks, you could assume that the .25 kodiaks would go about the same but prorably 50+ fps slower

Just to give you a rough estimate

Dave

i’m just trying to get a ballpark figure on what FPS i should expect for each barrel length using a kodiak pellet on a stock gun. 12″, 18″ and 24″. i’ve tested in .22 but was thinking about converting to .25.

quote Jeff:

too many variables to give to a very accurate estimate.

x2

too many variables to give to a very accurate estimate.

On average

12″ – 18″ is an increase of 100fps
18″ – 24″ is an increase of 100fps

Hope that helps

Dave

Viewing 10 replies - 1 through 10 (of 10 total)

  • You must be logged in to reply to this topic.