people shooting big power how many shots?
Just out of interest, how many usable shots are you guys getting per fill after you have modified your gun?
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
.25 cal= 1100-850 fps getting about 80 consistent shots…with kodiack
😎 😎 😎
I get 35 VERY consistent shots out of my Condor in .22 using a Talon valve… but thats at around 35fpe.
Last I checked with my .25 Condor running at 80-100fpe (depending on pellet) I can get 15 or so good shots… more if I allow for a bit more curve.
For comparison… My 909s gives me 5 shots in the 180fpe range close enough for no POI change at 50 yards.
My DAQ 50… only 3 at 340fpe
My detuned DAQ 308…. 12 shots at around 140fpe.
My Haley 32 (detuned)… 15 shots at 65fpe.
Thanks for the reply synopsys though I think you misunderstood . I was just wondering what people have found for them self with the mods they have done to there own gun.
1 to 200…
Modification can be for pure power or total shot count…
Some folks are shooting at 500fps and some at 1500fps…
There are four calibers at three different lengths, three different valve sizes and two different types of hammer weights, that is just for stock parts, add the modded parts and you get a thousand more setups…
If you state what kind of mods then someone may be able to answer your very open ended question… 😉
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
😳 I did misunderstand…
If installing a 24″ 25cal barrel and adding a Condor valve and hammer weight is a mod then i’m getting an easy 1050fps with 30 grain pellets in a TalonSS with a TH setting of 0.088″…
I am very, very impressed with this hop-up to a Condor from a TalonSS. It’s a simple modification for the end results!!! 😉