Beeman Falcon with Audrius regulator
Well, I have been having some issues with the Combro Chrony so I can
not post a string nor can I tell how fast the gun is actually shooting… I
have the regulator turn all the way up and from all indications it is running
somewhere in the mid 900’s with JSB 18.1gr… I can tell that because the
gun was shooting in the low 900’s before and now the POI is higher @
65yds than it was before I installed the regulator…
Here are a few targets I shot in windy conditions….. I am filling to
3,200psi and shooting down to about 1,800psi….
5 shots @ 65yds with JSB 16.0gr
5 shots @ 65 yds with JSB 16.0gr
3 shots @ 40yds with JSB 16.0gr
8 shots at 40 yds with JSB 16.0gr
8 shots @ 40yds with JSB 18.1gr
40 shots @ 65yds with JSB 16.0gr
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
And those guns are LIGHT! 😉
Got’ta wonder why so many makes weigh so darned much! 😕
Nice #s for 35fpe output. Thanks for the info.
If I fill to 3,200psi I get around 30-32….
How many shots are you getting on the reg?
Thanks Mike… This regulator is working much better than I expected….
Nice! 😀
Mike
I finally got to chrony the gun
It is shooting an average of 935FPS with JSB 18.1gr, an Extreme spread of 14
and an SD of 5…
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Got’ta wonder why so many makes weigh so darned much! 😕
Not sure… I tell ya when I first got it I figured it was going to be some cheap
POS… It is one of the best shooting and quietest I have.. It sounds like dry
firing a Benjamin 392 with no pressure in it. It is damn sure the most
powerful one I have….
My BSA S10 must weigh 12lbs… Heavier than the Rapid…