Opinions please New Rifle design
hi everyone have been reading your modification posts for some time now and have been designing parts for my stealth based on the things ive been reading during which i came up with something different what im looking for is your opinions the picture you see here is a complete blueprint that has taken me around two years to design ive costed it and it is economically viable should be around the 1000 pound sterling mark by the way excuse my punctuation or lack of i talk this way without breath so i never knew where to put commas sorry i will be trying to get the cash together to produce it if there is enough interest you guys have taught me a lot thanks could you please leave a quick yea or nae if you read this it will be regulated and have quick change barrels .177 .20 .22 and .25 @ 24″ long and 9mm @ 28″ long valve spring pressure is adjustable hammer spring pressure is adjustable valve lift is adjustable two pressure gauges quick fill tank angle adjustable grip trigger has adjustable pull and length of travel but its only one stage trigger pad is also adjustable so heres the pic thanks again 
All Replies
Viewing 15 replies - 1 through 15 (of 15 total)
I can’t remember the exact name
But it is the sniper rifle from the popular HALO 3 video game.
Has two set ups, 20mm barrel and .416 barrel
There is a video on youtube somewhere……….
Here is is, the NWT 20
Dave
pic still not come up probably me not knowing how to call it up the rifle design is single shot pcp in .177 .20 .22 .25 and 9mm
Looks similar. 😀
But they both look good. 😀
What kind of rifle it is?
hi mr-lama your picture does not appear on my computor 🙁 😕
Looks similar. 😀
But they both look good. 😀
bit of both really 5′ 4″ american size six dimensions of rifle is as follows 24″ barrel version 1000mm or 39 3/8″ long without suppressor or 1160mm or 45 3/4″ with suppressor width 60mm or 2 3/8″ height 215mm or 8 1/2″depending on angle of grip and without scope add 100mm or 4″ in the case of the 9mm version to the length it would be a bit of a brute to hump around but no idea of weight as of yet but made mostly from hard anodised aluminium and mild steel internals with a brass hammer
I’d buy one.
could get the height from the centre of the bore to top of the weaver rail down to 1 1/2″ but that still is not to optical centre in total probably 2″ 🙁
That’s either a little woman, or one BIIIIIIIIIIIIIIIIIIIIIIIIIIIIIG RIFLE! 😯
actual size
hi thanks for your positive replies ive measured the height from the bore to top of the sight rail and it is exactly 50mm or just under 2 inches height from cheek piece to top of rail 12.8mm or just over 1/2″ gonna see if i can shave it down a little as the scope will add to that figure thanks again you guys trying to work out how to use solidworks at the moment for weights and stresses other than the stress it gives me i love it really its loosely based on the .50 steyr mannlicher
awsome i give it a yes
My complaint with the straight stock design is the height of the scope to bore. Anything with more than 1.5″ of optic to barrel separation is a pain in the butt.
WOW, nice looking design. Looks almost like a barret rifle.
I say YES and i like the sound of 9mm. SAWEET!!
Viewing 15 replies - 1 through 15 (of 15 total)
- You must be logged in to reply to this topic.
thats cool