12"-TalonSS/kodiak extra heavys
Need your input. here is what i have going on
12″ talonSS tony 65gr hammer,tony bottle mod
stock spring, wheel on 8, shooting 21.1 kodiaks
fill-2800psi
802-1
808
802
800
796
791
794
791
789
788-10
781
780
778
772
770
771
769
768
765
763-20 i dont see any curve ?
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
there seems to be a bunch of little problems with them lately, your best bet would be to get the new condor internals and just switch them into your valve after a bit of polishing on the stem and top hat, I think A/F sells the parts to do it for around $70
What kind of problems thay look like thay would work great
It would give you a shit load of power. But you guys over there seem to be having nothing but grief with them….
I have a ckicken shit guage so when i say 2800 it could be +or –
i played with the top hat it works best at .80 what would a selph
valve do for me
Not about right for 12″ ?
your numbers look a bit low, I’m getting a bit more than 100fps more with my condor SS with stock hammer and spring, perhaps some more fiddling with the preload wheel and top hat is in order.
edit – I just reread it and it sounds like your running a moded talon valve? if so disregard the 100 + fps 😉
I’m gonna start sounding like a stuck record…. 😆 Add another 100psi to get a bell curve…
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
thanks blue jay i will look in to it