.22 cal Eley Magnum Bullets 30gr

just picked up a tin for £10 !!!

ye mate sorry sorted it now lol

Would like to see as well, if its not to much trouble. Have you ever chronied them? being such a tight fit, i’d bet they leave the muzzle with some authority.

Sluggo, its a wonder what a thousandths of an inch will do. I’d like to get a trashed barrel and use it for sizing the lr rounds. Thought even to mic all the unjacketed brands i could find, just to see if 1 would fall into the tolerence range. Funny thing is i tried an old .22 crosman barrel and the bullet slides right through 😯 . Thought i was slick for a minute. It beats spending .10 a round, if i can find one brand which runs smaller then the rest i’m set. May yet drill out some ali/brass tubing to the right dia and size with that, not a major priority just another on the list projects to do.

right lads here,s a pic off the two pellets i use . on the left hand side u will c a wasp magnum 30.6grans for the longer shot,s and on the right u will c a bisley magnum 21.4 grans for normal shooting .the pellet that we r talking about is the wasp magnum and when pushed into my condor barrel u r left with a mm off skirt out the barrle and i find it no probs to use it like this with great results ..

These sound alot like 22lr rounds i’ve tried. Tough to pull without damage to the lead. Tight fit, very but i can get them in the barrel. I’ve tried this a couple of times for penetration testing. Out penetrated any pellet by a good amount. I was using old coffee cans to see how many i could punch through, heavy gauge tin. 2.5 cans is my best through 2 cans and into one side of a third. The .22lr went through all 3 cans and left a decent divot in my concrete wall. Can’t speak of accuracy, but would like to try a couple of rounds. Nice as you can get these in 30g through 60g. Rabbits would love to see a pic. I think the tight fit helps as there is little to no wasted air, and at 30g that packs a wallop. Funny thing is they slide right through a crosman barrel.