220 Bar shot string from my R3M .25 Standard
I have had many EDguns, but this one is probably one of the best shot string out of the box.
Well the only adjustment I did is turned down HST screw to get the gun shooting 885fps. (it was setup pretty hot at 950fps)
And this evening I had some free time again and this is the shot string this thing produced. 😯
220Bar fill. SIXTY SHOTS of .25 cal out of the STANDARD length Matador! :8:
All Replies
Viewing 9 replies - 1 through 9 (of 9 total)
Myr3m standard is loud with jsb but whisper silent with the barracudas. I haven’t figured that one out yet. Mine was at 930 with jsb but I’m only getting about 40 shots.
That shot string is very impressive
After my Condor shooting casts (with a moderator), my Standard .25 Matador is second loudest but no one cares too much around my area. A .25 Predator pellet hit on a sparrow squarely is like a weak firecracker going off which makes the gun noise irrelavent. 😯
It’s nice. But it’s my loudest gun. Will have to look into getting it quiet.
Wow is right. That’s a nice string…..
I think a drop of about 10 FPS will flatten the slight rise higher near the end of the string so I will try 1/4 turn.
I don’t remember exactly. I do it 1/4 turn at the time and shoot 2-3 pellets through the chronograph to check speed.
I don’t remember exactly. I do it 1/4 turn at the time and shoot 2-3 pellets through the chronograph to check speed.
Cool. How much of a turn did you turn the HST to lower it that much?
Viewing 9 replies - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
With you gun being set at 930fps and getting 40 shots is about right. You can try to lower it down to 880-890 with JSB and you will get more shots and it will be much quieter.