30 shot string with s410 fac
When I first cronied my new 410, I filled to the suggested 2900psi fill per manual, and found that the first few shots were quite slow, and had to hit almost 20 shots before I would hit peak MV. I called Steve at PAG about this, and he said that’s not right, but sometimes the guns are a little different, try a 2700psi fill and crony it, which I did today. Here’s 30 shots with 18gr JSB heavies. It seems better to me, it starts off much stronger right away, but any input would be cool.
1/ 880
2/ 886
3/ 887
4/ 883
5/ 886
6/ 887
7/ 887
8/ 887
9/ 888
10/ 887
11/ 887
12/ 884
13/ 883
14/ 883
15/ 881
16/ 880
17/ 877
18/ 873
19/ 873
20/ 873
21/ 868
22/ 866
23/ 861
24/ 861
25/ 856
26/ 854
27/ 850
28/ 845
29/ 842
30/ 839
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.


Riff quote: “My best accuracy comes between shots 5 and 20 though.”
Yeah I’m not sure if it’s me or the gun, but that 1st 5 shot group is quite often iffy for me as well, and then I’m confident in the next 25/30 shots or so. Sometimes POI will stay good all the way to the 40th shot, but most times it quits being as accurate a couple of shots before that.
Also, I’ve noticed I’m not as consistantly accurate when shooting at lower power levels, which is kind of disapointing, but that could have been me to I guess, or maybe the JSB heavies just do better going faster, I’ll have to do more testing I figure.