Q:

#4 .30 Cricket Shooting 44g @900fps L@@K

OK, that’s not the actual shroud, Neil is making a 2 piece shroud, the screw on 6″ LDC is 1 3/4″ OD. has 5/8″ 20 threads

Has LW Barrel that is grouping 1/2″ @50

shooting 44g at 898-904fps for 29 shots from 250b to 140b, reg set at 140B

I wanted this .30 to be a single shot, kind of fun single loading the big pellet.

on the photo .30 on the work bench being cronyed, after 3 hours of tuning.


Attachments:

Kalibrgun

All Replies

Viewing 11 replies - 1 through 11 (of 11 total)

quote sniperlabyo:

quote Awny:

Very nice. Clearly you did not scarify accuracy as you are getting 1/2′ at 50yrd!

BTW, I hear Kalibrgun is coming with 9mm cricket. Any thoughts on that?

Awny

I was going to convert to 9mm, but the stock bolt was to small, so the new 9mm got to have a beefier breech to support the bore. with all the mods I been doing to get the stock .25 to 70+fpe, so I have high hope that a mod 9mm will retain 880fps shooting 77g :mrgreen:

Any guess on what shot count they can achieve for 9mm. I am guessing 15-20?

Very nice indeed.

Thats a nice piece of work. I hope i could have the skill to do something like this one day

quote Awny:

Very nice. Clearly you did not scarify accuracy as you are getting 1/2′ at 50yrd!

BTW, I hear Kalibrgun is coming with 9mm cricket. Any thoughts on that?

Awny

I was going to convert to 9mm, but the stock bolt was to small, so the new 9mm got to have a beefier breech to support the bore. with all the mods I been doing to get the stock .25 to 70+fpe, so I have high hope that a mod 9mm will retain 880fps shooting 77g :mrgreen:

quote dman1114:

what barrel did u use ?

LOTHAR WALTHER no Choke

Hoot, yes its been heavily ported—-from a .177 regulator, firing valve and breech. Had it shooting up to 925fps, but wanted good balance of power and shot count. The firing action and sound feels solid.

Very nice. Clearly you did not scarify accuracy as you are getting 1/2′ at 50yrd!

BTW, I hear Kalibrgun is coming with 9mm cricket. Any thoughts on that?

Awny

what barrel did u use ?

I’m assuming that is a converted .25???

i wasn’t aware the .25 valve had that much punch in it…of course I assume you did some mods on it to improve air flow.

Very nice indeed. Nasty beast to get shot with for certain!

Hoot:

Looks like my bench when I’m hard at it. Looks Great Ernest

Very nice! 😉

Viewing 11 replies - 1 through 11 (of 11 total)

  • You must be logged in to reply to this topic.