.491 dragonslayer bullets
here is a pic of some groups that i shot at 50 yards with this bullet that i desighned. one on bottom right was shot with a fill to 2700psi on each shot. i also made a 4 inch barrel extension that was on the gun when i shot these groups. i have got a high of 618.5fps 234fpe. all shot were over 600fps on a six shot string…
All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
the extension is six inches long with a inside dia of .500 and bored out two
inches to fit over the barrel. the barrel inside dia on my gun was .492 so
that is .004 clearence all around the bullet travelling thru the extension. it was made from 1inch alum round stock with two set screws. boring the extension to fit the outside barrel dia is crucial no more than .001 more than barrel dia. it does not make the report less but it does add fps and it looks cool to…
for easier loading and increased speed. my dragon slayer has produced 32 fps faster with this bullet than any other that i have tried. my gun shoots faster than most do and with the extension i have gained 8 fps across the board. i have got a high of 620fps 235fpe with this combo and my gun is stock. the bullets are for sale on adventures in airguns sight…
Are you making the extensions to sell (or trade:)
Does it also make the gun any quieter?
We are interasted in the barrel extension tell us more please, and that thing is blaaazzzzing!!!
Those are some SWEET ASSED groups and hey, GOTTA LOVE THE DS50
Geeezz everything about that gun is bad ass. Shoots great, mega power, what a nice looking rifle. Very nice indeed!
Can you explain the barrel extension in a little more detail? Sounds very interesting indeed.
are 275grain and are designed to shoot in the dragonslayer. sized to .491
for easier loading and increased speed. my dragon slayer has produced 32 fps faster with this bullet than any other that i have tried. my gun shoots faster than most do and with the extension i have gained 8 fps across the board. i have got a high of 620fps 235fpe with this combo and my gun is stock. the bullets are for sale on adventures in airguns sight…
how much do you bullets weigh? i’d like to learn how to make my own rounds someday. have you ever taken apart your dragon slayer? i have the old model and i noticed that it’s losing power when i fill it to 3000 psi. not sure if the valve stem needs to be replaced, but i don’t know if career has a website or schematic somewhere. someone that fixed my dragon a while back said that it’s built like a giant crossman. so perhaps it’s not too complicated to fix.
Nice groups! Tell me, was the extension to utilize wasted air? And if so, what benefit did you deduce from it? I sure would love to try out some of those pellets in mine, are you making any to sell??? Thanks
Joe
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
What would be the maximum length such a tube could be made without fear of clipping? Or would clipping not be an issue??? I wish they would have made the dragonslayer in a rifle format instead of carbine to maximize that caliber.
Will you make such extension tubes to sell? If so, how much? Thanks.
Joe