90 ci hpa tank for mini Prod
I just got airhog paitball valve. I replaced the 90 ci HPA regulator with it.
It’ll fit my backpack. I’ll check how many fill it can get for Prod or r3m.
Prod and rapid mini bullpup are on the way. I’m getting ready for The Summer.
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
Thanks.
Did you get the tube extension from Jim at MMMW?
I don’t want to vent the tube. Vincent makes the reg for Mrod. It replaces the gauge block with Regulator and no need to vent the tube. But he’s not ready to make the reg. for Prod.
There is a guy on GTA that makes regs for the p-rod, but you lose use of manometer for tube pressure, reads regged pressure. And you need to vent the tube.
24″, mines longer due to a longer air tube added.
There is a guy on GTA that makes regs for the p-rod, but you lose use of manometer for tube pressure, reads regged pressure. And you need to vent the tube.
You’ve got yours. I’m still waiting. 18″ Length?
I like mini Prod to be regulated. But nobody makes it now. Vincent has good one for Mrod, but He needs certain number to put in order. just wait.
You’ll like the mini bullpup set up. I got mine together, but after some modifications it has a leak that I’m procrastinating about having to tear it all apart again.
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Yessir.
Mr. G is my patron saint for custom p-rod parts.
Altaros makes a non-vented reg for the disco, so a 2k vs 3k fill shouldn’t make a difference . I’m just going to do the bstaley thing for shot control.