AA 510
Anyone know the thread and size of the shroud for screw-in moderators?
It’s 1/2 by ???? Or ??mm
Suggestions for someone who knows how to make a good one?
Thanks!
Hoot
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
The article I saw said 1/2 UNF which is 1/2-20. You can always count the threads on the barrel and multiply by the length. If you have 5 threads in a 1/4 inch it’s 1/2-20.
There’s a guy thats been selling on here and the yellow and has pics posted in the shroud forum. While not state of the art they look solid and well machined and should hush the remaining sound from that gun. Looks like a green scotchbrite could be wrapped around the baffle if needed.
Don’t know how to post links.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
PAG advised me the 510 has a slightly larger diameter shroud than the 410, and now includes the “classic” air tube as standard gear on the carbine.
He says a good 25 full power shots. No regulator, but I believe Andrius reg may work on this. I’m trying to track one down. A couple of posts indicate shot increase to 40 per fill. I’d drop a C note for that kind of improvement.
It ain’t no Edgun…but it will do until September.
Hoot