About my KG Crickets …

:8:

I have 2 Crickets, a 22 Standard (2013) and a Compact 177 (2015) both purchased from WWAG.

On the left my 22 cal Standard tuned to 31 fpe with JSB 18g @ 880 fps.
Right my 177 cal Compact tuned anywhere from 9 – 20 fpe with JSB 8.4 or 10.4g.

Cricket Factory Manual:
https://drive.google.com/file/d/1eDIQ913MsclW1xmjAIQ7RChgWir8IwY8/view?usp=sharing

Part Schematic:
https://drive.google.com/file/d/1ljaiqiL–FOSNP7Rr3eKFfrfjPoAlFAu/view?usp=sharing

Cricket O-rings/Ernest:
1. Rotor: The o-ring on the unregulated pressure side of the piston rotor o-ring is a static seal that I replace with a 1.9mm X 3.8MM Buna-N 90 o-ring. that the hardest working o-ring in the air tube, its seal out up to 300B pressure while the rotor in motion when you take a shot, the regulated side of the rotor is 2mm X 10mm V70 Viton o-ring.

2. Regulator OD: on the high pressure side is use 3mm X 24 mm V75 Viton O-ring and on the regulated air side OD I used 3mm X 24MM Buna – N70
3. Air valve end cap: this o-ring seals only regulated air so only 3mm X 24mm Buna N70 required.
4. Fill Valve end cap: this o-ring is subject to 300B pressure so I used 3mm X 24mm V75 Viton.
5. Fill check valve: this o-ring is subject to 300B 1.5mm X 3mm V75 Viton
6. Gauge: subject to 300b pressure 2mm X 9.5mm V75 Viton
7. Barrel breech end: 1.5mm X 10.5mm X2 Buna-N70
8. Air valve to action: 1.5mm X 16mm X 2 Buna-N70
9. Barrel probe o-ring .25 cal 1.5mm X 6.5mm Buna-N70
10. Fill probe o-ring: 1.5mm X 3.5mm X2 V75 Viton
11. Barrel probe o-ring .22 cal 1.5mm x 5.5mm, .177 cal 1.5mm x 4.5mm , .25 cal 1.5 X 6.5mm

Places to buy O-rings separately
http://www.theoringstore.com/
http://www.oringsandmore.com/

OR if you’re in need for just one complete O-ring kit, select your caliber
http://www.biggo.co.uk/kalibrgun-cricket-o-ring-kit-9-p.asp

My Cricket Bullpup Wood Stock Hack
http://talonairgun.com/forum/viewtopic.php?f=33&t=32021

My How to make a CRICKET GAUGE SOCKET
http://www.network54.com/Forum/79537/thread/1391484280/How+to+make+a+CRICKET+GAUGE+SOCKET

My Cricket Magazine Speed Loader
http://s1277.photobucket.com/user/GKU1/slideshow/HP-HPE/AirGuns/Speed%20loader

My Cricket 22 Polymag Jam Fix
http://talonairgun.com/forum/viewtopic.php?f=33&t=29621#p299015

My Tape Test, How to test for Pellet clipping LDC alignment.
http://talonairgun.com/forum/viewtopic.php?f=1&t=31780#p322330

Some Good Reads …..

Cricket changing poi
http://talonairgun.com/forum/viewtopic.php?f=33&t=31238&p=315704#p315704
http://talonairgun.com/forum/viewtopic.php?f=33&t=30558&p=308451#p308451
http://talonairgun.com/forum/viewtopic.php?f=33&t=30558

Re: Viper pro 5-30×50

How to achieve Optimum HST Adjustment
http://www.talonairgun.com/forum/viewtopic.php?f=33&t=31059&p=313811#p313811

Dialing back my Cricket .22
http://talonairgun.com/forum/viewtopic.php?f=33&t=29445&p=297817#p297190

Regulator theory
http://talonairgun.com/forum/viewtopic.php?f=33&t=29415&p=296962#p296904
https://www.youtube.com/user/robertlanedesign/videos

Cricket parts & accessories:

Donnyfl Modified Cricket Side Plate, email: donnyflshop@gmail.com
http://www.talonairgun.com/forum/viewtopic.php?f=33&t=37048#p384479

Cocking Plate replacement Screw-Countersunk Phillips M2x8 and M2x4.
https://www.ebay.com/itm/M2-Black-Oxide-Phillips-Cross-Recess-Countersunk-Head-Flat-Head-Machine-Screws/172123153150?hash=item281356e2fe:m:mHSCLx10Hl6Kg1nvNkGd78g

Cricket .177 & 22 cal and Mutant 22 cal/Veteran 22 & 25 cal Magazine Holders by: Bizill, email: Bizill@msn.com
http://talonairgun.com/forum/viewtopic.php?f=37&t=37132#p384093

CRICKET GAUGE SOCKET, if you don’t want to make one
https://www.ebay.co.uk/itm/Kalibrgun-cricket-air-gauge-tool/132385904211?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49131%26meid%3Db51e1869ef08418993f06d3acb8e78fc%26pid%3D100623%26rk%3D4%26rkt%3D6%26sd%3D112631273064&_trksid=p2047675.c100623.m-1

Regulator internals, make your selection
http://laneregulators.com/shop/kalibrgun

KalibrGun Mk8 Lancet Regulator (PCP) Kit – by Lane
http://laneregulators.com/shop/kalibrgun

Regulator puller
4mm x 0.70 thread pitch, same as barrel alignment screw.
https://s20.postimg.org/mik0tp82l/P1013100.jpg

Cricket Regulator Tester by Dman/Jaime, email: lavalleeja@gmail.com
https://s20.postimg.org/t62drlblp/P6011665.jpg

The Best HST V3+ with degasser
http://en.shop.dase.fi/product/47/
https://www.dropbox.com/s/6o1p2mqq8plw27b/HST%20Install%20V3%2B.pdf

Hanmer springs
OEM replacement

Stainless Steel Hammer Spring that I use in both of my Crickets

Replacement magnets for BP stock mag holders
https://www.apexmagnets.com/5mm-x-5mm-cylinders?fee=5&fep=135&gclid=CICCvKT3gMwCFUmRfgodKOID6A

Nylon tip replacement set screw for AT bleed out
http://www.mcmaster.com/#94095a112/=rhebuo

Johns Cricket Trigger Blade Mod with bronze bushing, email: hagantool@aol.com
http://talonairgun.com/forum/viewtopic.php?f=33&t=29856&p=301042#p301023

…….. more to share soon, I’ll be editing and adding above the new in Blue.

~ Greg