AF TriRail Question

What is the overall length of an AF TriRail?

Looking for the measurement across the top or the bottom length.

TY!

General Chat

All Replies

Viewing 5 replies - 1 through 5 (of 5 total)

synopsys

Participant

July 28, 2013 at 8:06 pm

Ah, that’s good news. It just may work then!

I also figured out I can machine down a Picatinny blank with a 3/8″ 60 degree dovetail cutter from Grizzly (part # H2955).

Thanks again Andy!!! 😀

andyjr11

Participant

July 28, 2013 at 5:04 pm

It is exactly 11 mm.

synopsys

Participant

July 28, 2013 at 2:38 am

Thanks guys!!!!!!

I’m thinking about using on in place of the EdGun rail that has 30moa of drop. Thing is i’m finding the rail is 10.5mm across the top and the other 11mm rail I have is too wide.

Any chance either of you could measure across the top of the dovetail? :8:

andyjr11

Participant

July 28, 2013 at 2:20 am

8 in. across the top, 8 in. across the bottom and 9 in. overall.

tagdagger

Participant

July 27, 2013 at 11:57 pm

Have not had a trirail for a while, but it should be the same as the top rail on a talon or Tss. 8 1/8”

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.