Air Wolf and his big brother
I picked up this AirWolf several months ago. The shroud had been shortened and an LDC installed. The job was effective but no worthy of this rifle. I called my buddy Dave (Ribrab off the yellow) and asked him for help. Dave made a new shroud that ended right at the barrel and mated nicely to one of his HW type LDCโs. The rifle retained the nice short carbine feel and gained a higher neighbor rating with the reduced noise levels.
The Al anodizing is off two different batches so the future I plan to strip both parts and have then refinished, but for now Iโm satisfied.
Oh yea this thing is a 20 cal tack driver. I use the Beemen Kodiak double gold pellets and this combination has severely impacted the grackle population in the hood.


Not to make T jealous heโs my FX T12 Typhoon 22 cal. The FX is a nice light and accurate 27 fpe rifle. The Walnut is pretty and warm. Now I just need to make a de-pinger.

All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.

HeeHee! 8)