Airforce co2 adapter
Hi,
Has anyone taken apart the co2 adapter? Could you please give some instructions as how to do it? A pictorial would be even better. Thanks in advance.
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
So how do you take a regular valve apart?…
I noticed a slow leak when i put it on my regulated tank so just trying to see if there’s something broken in the adapter. I already ruled out the tank.
yes…
remove the valve the same way as on a tank, and take the valve apart.
the rest is solid(cheap) steel with a burst disc.
whatcha tryin to do?
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
it happened to me once, I ordered from vincent.
I put it on my hpa tank and taken about 300 pellets, and I found a leaking.
I called AF and they told me to send it back to them and fix it. but I like to fix it myself. so take it apart. using a flat screw driver to left the tophat up by levering around and tophat will off, and then turn off the brass part, you will see the plastice part, I saw mine that has a little bit scratch, maybe from my tank, I don’t know. then I called AF again, they sent me the plastic one which is bigger one in the picture for free. now it works very good so far.
sorry about my Eng.