also who can…
another request for you talented fellas…
with my LCS hammer/spring assy. the PW is now gone, and im using tape to close the frame in. can someone come up with a plan or give me a suggestion to fashion a cover to fill the empty slot in the frame and attached externally to the frame?
i find myself needing a lot of one-offs lately… 🙄
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
I can’t see any reason c/f wouldn’t work, but then again I have never farted around with the stuff…. perhaps riffraff could chime in on it, I think he’s played around with it some…
well, doug, its become abundantly apparrent to me youre too busy lately, so i wont bother ya.
but to answer, its basically nothing but spring in the PW SLOT.
whatcha think of carbon fiber(got that)…?
Put a sticker over it
Is there a solid spacer inside behind the hole? If so I guess I could waste a lot of time and make a piece that fit in and bolted to the spacer behind. Time consuming though. Would machine a piece same OD and ID as the frame and then cut a piece out to match the hole
get your self some 1in alu tubing and fashion your self a little cover that is held on with 4 little screws, or you could even epoxy it in place right there for a cleaner look
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
on the right track, tho, i appreciate it…