Altaros Regulators for AAs4xx (BSA,benjamin marauder e.t.g)
Actually i ll give a description for the Air Arms version but for those who are interesting of an another version there is a link below which belong to manufacturers official site.
So…..”Altaros” regulator it replaces the brass nipple inside the air cylinder.
The output accuracy is 0,5-1,5bar for all pressure ranges
About performance part it can push really fast at realtime(http://www.youtube.com/watch?v=nlM_9Unqyhw),and no needs spacers or extra chamber,so the air cylinders volume remains almost the same as stock.
….And the most important…no needs drilling for vent or anything except normal.
About coherence the results are the same as CZ200s version.. http://www.strelectvi.info/cz200s/recenze/cz200s_regulator/cz200s_regulator.htm
Check These Out:
http://vscharlie.rajce.idnes.cz/Regulator_od_Altarose/
Does anyone of you give a try on them?..if yes,please make a report of impressions.
All Replies
I have been using this regulator on both CZ/AA S200 and BSA Lonestar for about a year now. It has been a huge improvement, especially for the Lonestar. Mine is quite new and the striker coil spring is too strong – so without a regulator, the rifle was extremely air-hungry and each shot was 20 to 30 fps slower than the previous one. With the regulator, I get about 15 perfectly consistent shots (about 6 fps spread).
The CS/AA S200 had been a bit tricky to adjust with the regulator, but we did succeed in the end. I have had no problems with the gun ever since, although I do use it quite a bit, including FT/HFT competitions.
I also considered it for my GP SSS (Condor) but then I chose a larger regulated bottle from JDS Airman instead, the main reason being the pressure gauge and the quickfill port.
Might fit since the tank neck is 18mm, you have to fabricate the valve to attach to it & that’s what I want to do, since his regulator doesn’t require you drilling a 1mm hole for atmospheric pressure.
I am ordering from him as we speak, just waiting for the price including shipping.
would it also fit inside a talon tank
Naser404
The basic dimensions are:
length 91 mm
diameter 13.7 mm
Size chamber with a regulated air at this size is 3.4 ml.
I can connect to regulator an extended air chamber with the size according to required amount of air.
Altaros,
i would like to buy around 5-7 peices, can you make them to certain specs too, as in size dimentions ?
Thank you.
I’m the producer and seller of these regulators. I’m making a the regulator almost 3 years for the Czech and Slovak Republic but in other countries, I began posting recently.
For easy installation in the Air Arms air rifles I made these two videos:
http://www.youtube.com/watch?v=A4e3-ViLsME
This setting is for 16j (11.8 FtLbs).
This Regulator is the same for all airguns only change the handle end. For more information on the regulators for other airguns are on my website:
http://www.altaros.cz/
Alternatively, you can write my on mail: altaros@seznam.cz.
The price is 84 euros with shipping. Payment by Pay Pal or bank account.
With Kind Regards
Andrew
- You must be logged in to reply to this topic.
Yes I think it will fit inside the bottle, but you need to fill your bottle
I don’t think you can fill the bottle TROUGH the regulator?