Any interest in titanium replacement trigger group!!!!
I have access to a wire machine would there be any interest in a all titanium replacement trigger group and if so what do you think they should sell for
All Replies
Right back at ya 😉
got ya.. 😆 😆 😆 😆
some people will actually believe it..
and wok.. you are AMAZING….
hope you enjoy your new little knob..
I think something fishy is going on here..you see wok has a 2 second time delay on all post made here..most of you havent noticed it but I have..he actually reads all the post while they are being up loaded..he read this post first and sent the pm..one day I had a post answered before it was even posted..it was quickly corrected and no one ever knew it..
Tut Tut, my surprise is barely containable……
Thats what to much alcohol and weed does to you guys….LOL. I must be amazing to be able to answer a post in 2 seconds….LOL Refresh your page 🙄
I think something fishy is going on here..you see wok has a 2 second time delay on all post made here..most of you havent noticed it but I have..he actually reads all the post while they are being up loaded..he read this post first and sent the pm..one day I had a post answered before it was even posted..it was quickly corrected and no one ever knew it..
Tut Tut, my surprise is barely containable……
I will be posting the progress of the trigger parts.
I will be Cuming out with custom bolt handles here is a pic of one so far you know what the first person to send me an email will get a free one sent to them I am in the giving mood tonight
Dang I was hoping you would have a lathe that cost more than mine.. 😉
I think something fishy is going on here..you see wok has a 2 second time delay on all post made here..most of you havent noticed it but I have..he actually reads all the post while they are being up loaded..he read this post first and sent the pm..one day I had a post answered before it was even posted..it was quickly corrected and no one ever knew it..
I just talked to him on the phone and that is what he mentioned A2 is what I think I will go with thanks for the reply
Ask your metallurgist about A-2! 😀
Lots of advantages there, and no nasty oil quench!
Mike
Ohh, Ohh, new stuff gettin’ put on the table….
Wheres ma wallet…… 😀 😀 😀 😀
See WOK what goes around comes around just like my Grandma told me when I was growing up.
I hope you enjoy the handle I look forward to hearing what you think I will be coming out with a couple
of other designs I am thinking of incorporating some carbon fiber into them as well
I won?! Holy smokes I am usually the one giving stuff away 😆 I will send you my address.
Thanks Brad.
It looks like Adam gets the first bolt handle enjoy
Brad, I’m with Doug on the use of ‘soft’ materials used where a glass like hardness is required. Tool steel and hardened would be the ticket.
Fellas from the TOG days may remember this discussion and IIRC the edges rounded over quickly.
Good luck.
Breech knob looks sweet!
Walter…
I currently have a $50,000.00 ROMI cnc lathe in the shop so I figured I would think of some nice parts for the air force gun ill check and see what the metallurgist I currently work with recommends for material.
I will be posting the progress of the trigger parts.
I will be Cuming out with custom bolt handles here is a pic of one so far you know what the first person to send me an email will get a free one sent to them I am in the giving mood tonight
- You must be logged in to reply to this topic.
Tut Tut, my surprise is barely containable……
Thats what to much alcohol and weed does to you guys….LOL. I must be amazing to be able to answer a post in 2 seconds….LOL Refresh your page 🙄
LOL, yes, not even you are that quick 😕