Any news?
Has anyone heard anything about when the edguns ordered in the US around may and June will be in?
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
I made this adaptor out of spare fittings that I had.
The Matador’s fill probe is 1/4″ BSP threads. I like the 90 degree fitting, it makes it easier for me to fill the gun while it is sitting on a shooting bench.
Call Joe up and he can supply you with any fittings that you need.
http://www.airtanksforsale.com/
Don’t go to a hardware store for your fittings! The hardware store stuff is only rated for 350-500 psi. I have seen guys use them and it scares the shit out of me!
Don’t use Teflon tape on the threads! You will eventually get a little piece of it blown into the gun and it will plug up the reg or air valve. If I have to use anything, I use the plummer pipe dope.
What kind of adaptor do I need to fill the edgun? I’m going to be filling from a hill handpump and I know the fitting isn’t a foster
I’d say the wait is more towards the 9+ month side of the estimation… Back in November 2011 I ordered a .25 long and a .22 standard; the .25 long arrived in May but I’m still waiting for the email from Tony on the .22 standard.
They’ll be here… eventually. At least they’re worth the wait! 😀
I’ve had my 5th Matador ordered for a few months now; Tony will let me know when it comes in.
Good things come to those who wait! Don’t do like some of the first time buyers do; make sure that you have plenty of pellets, an adaptor for the fill probe, a scope with mounts and plenty of air ready when the Matador finally comes in.
I ²nd this!
Brandon, you are looking at a 6-9 month wait and it is worth every minute of it!
I’ve had my 5th Matador ordered for a few months now; Tony will let me know when it comes in.
Good things come to those who wait! Don’t do like some of the first time buyers do; make sure that you have plenty of pellets, an adaptor for the fill probe, a scope with mounts and plenty of air ready when the Matador finally comes in.
…crickets…
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
The Matador’s fill probe is 1/4″ BSP threads. I like the 90 degree fitting, it makes it easier for me to fill the gun while it is sitting on a shooting bench.
Call Joe up and he can supply you with any fittings that you need.
http://www.airtanksforsale.com/
Don’t go to a hardware store for your fittings! The hardware store stuff is only rated for 350-500 psi. I have seen guys use them and it scares the shit out of me!
Don’t use Teflon tape on the threads! You will eventually get a little piece of it blown into the gun and it will plug up the reg or air valve. If I have to use anything, I use the plummer pipe dope.
I got my bspp to JIC adapters from a hydraulic shop online. They also have bspp to dang near anything you could ever need. Don’t know about the QD’s though.