Any videos out there on how to install the hammer slap mod ?
I see there are many different ways in installing the hammer slap mod from talon tunes for the condor SS . I was wondering if someone might have done a video on the easiest and best way to install the hammer slap mod ?
All Replies
Viewing 13 replies - 1 through 13 (of 13 total)
Helpful hint guys. Most of us have the same problem of the set screws falling off the end of the allen wrenches when we are trying to install them. It can be frusterating. Here’s a little trick. Place a small piece of paper towel on the end of the allen wrench and insert the wrench into the allen screw head. The added friction of the paper towel will lock it on and prevent it from falling off to who knows where. 😆 (It is especially helpful for that damed little plastic power wheel screw. 😆 Ask me how I know! 👿 😀
Knife
that is a great idea i just dont drop them lol
Thanks for making this Vid Pan. 😀 It is going to help a LOT of the new Guy’s out! 😉
Helpful hint guys. Most of us have the same problem of the set screws falling off the end of the allen wrenches when we are trying to install them. It can be frusterating. Here’s a little trick. Place a small piece of paper towel on the end of the allen wrench and insert the wrench into the allen screw head. The added friction of the paper towel will lock it on and prevent it from falling off to who knows where. 😆 (It is especially helpful for that damed little plastic power wheel screw. 😆 Ask me how I know! 👿 😀
Knife
Yes I know he gives written instructions but a video would be nice for those that are having an issue or undecided on which is the best way to install his product ! If Tonys hammer slap mod reduces the way the gun sounds when shot is a mod to me since it replaces the stock hammer !
his hammer slap mod is included in his hammer now you just replace the stock hammer and weight with his new hammer it already has the mod done to it. There is no mod to anything any more its a drop in replacement part.
It’s a good video on how to disassemble your condor but I am looking for a video that is more towards showing how to remove and install Tonys hammer slap mod ! Very good video though thank you !
if you can get your wight out it is but you have to remove a small part and I still could not get the weight to come out the back end so I just did it from the front and its easy.
http://talonairgun.com/forum/viewtopic.php?f=4&t=27098
thats a link to removing the tab and getting access from the back end 😉
http://www.youtube.com/watch?v=XJvJl-5nyYc
http://www.youtube.com/watch?v=-zHD5fXnrsA
a couple of vids on how to remove the barrel and other parts
Someone said it is easier to remove and install the new hammer slap mod from the breach area
it really is easy.
Remove handguard from barrel tube 1 hex bolt.
remove set screw from barrel end cap.
remove screw from the power wheel gague
remove 4 set screws that hold in the barrel.
pull out barrel. I had actualy removed the breach and stuff when I tried to go in from the back end so I use used a plastic dowel and tapped the barrel and it slid right out.
tip the gun and the spring power wheel and wight and hammer will slide out.
slide all the parts back onto the barrel to keep them aligned and slide it all back in. Snug up the bolts and your done.
Maybe tony from talon tunes would be kind and do a helpful video on how to install his hammer slap mod on the condor SS since there are so many of us looking for the easiest and best way of doing it .
I just went through the same thing and never did find anything lol.
Just go from the front and remove the barrel its simple. just watch the airforce manual and it shows how to do it. But the vid is of the old style I guess they dont make enough money to redo the vid.
Viewing 13 replies - 1 through 13 (of 13 total)
- You must be logged in to reply to this topic.
Your time is a comm’n! 😆 😉
Knife