Barrel/shroud isn’t perpendicular to airtube on R3M .22
Is this normal? I got this gun around Thanksgiving and so far the accuracy is somewhat disappointing, and I noticed the airtube and shroud aren’t spaced the same front to back. Just curious if this is normal or not.
All Replies
How did Squirrelwanker respond to his own post???
Hoot:
SquirrelHawker, possibly you have the fixing bolt that secure the gun (action) to the stock to tight. Try backing off that bolt a turn or 2 and see what kind of results you get. I usually make myself a feeler gauge to make sure that gap space between the air tube and the moderator is even during reassembly. SquirrelHawker have you had the gun out of the stock recently?
If you could post a pic..it will be more clear for us…but anyhow. .if the gun is not accurate and barrel is not parallel to the air tube. .then talk to tony and send the gun back to him….
Accuracy is everything for gun…
- You must be logged in to reply to this topic.
No its not normal, they should be parallel.. remove it from the stock and see if that changes it..
What are you talking about Hoot: Have you finally gone mad?