Best LDC design?

What is the most effective LDC design for the Condor? Baffles, monocore, washers?

Shrouds and Moderators

All Replies

Viewing 4 replies - 1 through 4 (of 4 total)

lifo2001

Participant

July 10, 2015 at 5:00 pm

Thanks for the tip Rdstarr. :tag:

rrdstarr

Participant

July 10, 2015 at 2:59 pm

I personally have made “K” baffles that I have made for .22lr rifles and pistols that work excellent. Made of 6061 aluminum or of Delrin for the airguns. I had a manufacturing license and all the stamps to do that in the US. Not to difficult to make. Almost all of the silencer makers in the US use “K” baffles.

lifo2001

Participant

November 12, 2014 at 5:22 pm

The gun is .25 cal standard 24 inch Condor not threaded, its shrouded.

1. No noise there – hammer slap modded.
2. What baffle design works best in general, what length is recommended?
3. I know – sonic boom 🙂

hecs1969

Participant

November 12, 2014 at 3:12 am

What is your FPS and caliber of the pellet you shoot?
Is your barrel threaded (like 1/2″-20)?
There are three things to work on:
1)Receiver noise: There is little you can do unless you use a TT Top Hat modification.
2)Noise at muzzle: A good LDC with baffles, correct material, length of LDC will minimize report.
3)Speed of sound: There is not much you can do if your FPS is over 1150.

Viewing 4 replies - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.