Bi-pod/Handgrip
I just got this today it’s a combonation Bi-pod Handgrip that works really well. The legs retract into the handgrip when you don’t need them.Just wanted to post for all to see.
http://i675.photobucket.com/albums/vv113/Chupacabra714/SSHandgrip.jpg
All Replies
Hmmmm….Good question…I was going to use it for a laser mount but it is on back order so I ordered the small pair….
http://www.opticsplanet.net/b-square-air-gun-adapters-risers-dovetail-to-picatinney-weaver-fits-9-5mm-13-5mm-dove.html
I was looking at that one too, my question is since it fits 9-13mm dovetail rails, if used on a scope with a 9 or 13mm rail wouldn’t it be off center?? 😕
For a bipod it doesn’t matter but how is it that all dovetails are treated as one…?
It’s a Grip Pod GPS-02. Brownell’s sells it and it’s on Ebay just make sure it’s legit if you go the Ebay route.
Thanks…I broke down and ordered this one…
http://www.opticsplanet.net/b-square-air-gun-adapters-risers-dovetail-to-picatinney-weaver-fits-9-5mm-13-5mm-dove.html
These are the adapters I used…you only need one.
http://www.midwayusa.com/viewProduct/?productNumber=360568&utm_source=bsbsquareadapter_img&utm_medium=homepage020909
This one came on a Bushmaster I bought so I’m not sure how much it cost but it’s stamped “made in the USA” so I would say it wasn’t cheap. I had a dovetail to weaver adapter that has a very small footprint that I used to attach it to the Talon SS. I figured I’d get more use out of it on the SS than the Bushmaster and it is a pretty solid fit. As for the constuction it’s polymer with some metal parts in stratigic places. I’ll look at it when I’m home and post the manufacturer for those interested.
I don’t know…I was hoping some of the mod gurus had a clean setup to go from 11mm to weaver or what ever else there is..
Can the rail adapter be removed and modified? That’d be the “cleanest”
reconnect – imho – assuming you are ok with cutting into the new toy. 😀
I can’t figure out a good way to attach these to the 11mm rail without some bulky adapters….How are you guys doing it?
There are 4 types on ebay in the $40-200.00 range This one
this one
And this one
thats exsactly wot iv bin looking for. is it ABS Polimer?
looks grate bud.
also how stable is it?
I have seen those I just cant remember where how much did it cost??
- You must be logged in to reply to this topic.
BKL mounts are designed to clamp centrally on dovetails to eliminate cant.They are the only mounts recommended by Daystate.I have a set on my X2 and can confirm that they do centre the scope.
Only downside is they are expensive over here in the UK,can’t comment on US prices or availability.