Big bore barrel vendors?
I picked up a used condor ss in .25 cal and would like to upgrade to a .30 cal or .357 barrel.
I noticed Eldy bigbore is not in business. Any good big bore barrel kit suppliers out there?
All Replies
Viewing 9 replies - 1 through 9 (of 9 total)
Heard the good works of Mike and TJ on big bore barrel before.
You’ll have to find either a tuner or a machinist willing to do the work. Tony may take on the job, check with him…
Have a friend who has a lathe! I do my own, but I am in Canada.
I’ve been interested in rebarreling my texting… And stumbled across this post. After the barrel is ordered to the length that you want how do you get it machined for the breech?
On average mine are costing around $130+. Less than $200, for sure. There’s multiple OD’s. Cost is determined by length, as they are charged by the inch. Most of my barrels are originally 27″ at the most.
What length can you get and how much do they cost? I haven’t ordered my .257 yet.
Mr Sayer
TJ’s Enterprises
3652 Neltner Rd
Alexandria, KY 41001
859-635-5560
no website, call and talk to Mike.
I think Mike at TJ’s pretty much dominates the market for when people want to swap out their barrels… Even for normal calibers. All my modified PCP’s have a TJ barrel: .257, multiple .30’s, 6mm, and soon to be a .357. I’m even going to be ordering a .25 and maybe a .22!
Mike Sayers at TJ’s Liners
Mr Sayer
TJ’s Enterprises
3652 Neltner Rd
Alexandria, KY 41001
859-635-5560
no website, call and talk to Mike.
Also Track of the Wolf has barrel liners that work for Airgun barrels.
https://www.trackofthewolf.com/List/Item.aspx/637/1
Viewing 9 replies - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
Yep, probably 90%+ of guys who re-barrel their guns, build custom guns, or build guns as a business use TJ barrels, from .22 all the way up to .457. TJ’s is your best bet for an aftermarket barrel.