Bolt is hard to open/close
Bolt is hard to open/close
Talon will not cock
any help on this
guy
All Replies
Viewing 15 replies - 1 through 15 (of 15 total)
Hi Adam
Thanks
What do you make for the Talon line?
I always see you Items are they 4/s
I’m trying to get a shooting club started on Long Island
If you know any airguns who like to shoot
Please let me know.
Guy
Good to hear Guy.
1. Talon up and shooting
2. Replaced O-Rings Cleaned and libe
3. All parts moving will.
4. BIG THANKS TO ALL WHO HELPEd
Guy
The safety on these guns can mess with the sear making it hard to impossible to cock. The brech runs on the barrel so i’d be looking at the sear area as potential problem as well as the screw which was mentioned. Loosen the screw and see if things improve. If not you can rule it out and move on to the next.
1. Order came in O-Rings
2. Only time to work on it is friday night
will let you guys know.
Thanks for all your help.
Guy
Guy,
Did you get your gun working?
here’s a better diagram for you to look at
http://talonairgun.com/forum/viewtopic.php?t=1161&highlight=
Trigger group:
http://talonairgun.com/forum/viewtopic.php?t=132
1. Remove bolt, noting missing
2. Checked O-rings and small rubber spacer clean
3. Still not cocking
4. Need a good drawing on how the trigger grop components
go.
5. dose the trigger foot go over or under the intermediate bar?
6. the safety catch go in front of spring ?
Guy
Check the screw that holds the trigger guard on the frame. I had to grind a bit off the end because it was blocking the travel of the hammer when cocking. Loosen the screw and see if it helps.
Also, unscrew the cocking knob from the bolt and see if the little plastic collar is damaged. Might be sticking in the slot.
Yes, With tank off, still hard
and still not cocking
When you take the tank off is the bolt still hard to open and close?
Cocking could you need to advance your sear spring forward.
Remore bolt, clear
Just hard to open and close
And will not cock at all
Guy,
What seems to keep the bolt from opening or closing?
Take off the tank and look inside the bolt. Are the orings intact?
Viewing 15 replies - 1 through 15 (of 15 total)
- You must be logged in to reply to this topic.
3 Comments
-
Pingback: Pragmatic Play Casino
-
Pingback: attraction in phuket
-
Pingback: https://woocasinonodeposit.com
Thanks
What do you make for the Talon line?
I always see you Items are they 4/s
I’m trying to get a shooting club started on Long Island
If you know any airguns who like to shoot
Please let me know.
Guy
I like to tinker around and come up with stuff I want. I think I will be putting together some type of butt plate pkg. so guys can upgrade theirs. Hopefully I can get something together today to show you guys.