Brass valve removal
Hi all, I’m wondering if anyone knows of a tool to remove the ” What I call it the brass cap that holds the valve” has 2 small holes on it?
I also need to basically rebuild the inside of this. Does anyone have parts to do a complete rebuild? Thought I would ask here before calling AF. Any info would be greatly appreciated. Thanks Kip.
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
I did it myself , here is how:
make sure the tank is empty, then take a punch chisel the size of the holes in the brass, then with a small hammer, hammer the holes alternatively in a counter clockwise direction.
The tank must be held in a vise during the operation.
When reassembly it , smear the threads with silicon grease.
Good luck
I also need to basically rebuild the inside of this. Does anyone have parts to do a complete rebuild? Thought I would ask here before calling AF. Any info would be greatly appreciated. Thanks Kip.
Hello, i dont know how to tell you but i didn’t do myself, I take it to a “taller industrial” ( its in espanish) or….. A place were all machinist do things, and they open it
Enviado desde Area 51
Enviado desde Area 51
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Thanks I’ll give it a try.