Can anyone post there tuning setup for the Marauder .25 cal
Can anyone post there tuning setup for the Marauder .25 cal
My Stock Settings:
Hammer Spring 4 1/4 in from all the way out.
Striker 3 1/2 tuns in from all the way out.
Metering screw 3 1/2 turns out from all the way in.
Thanks!
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
i think you should be getting more like 24 shots at that energy level. what type of tune do you want? high power? high shot count? low extreme spread? what are you going for?
Looks like your H-3 1/2 and S-0 is the way to go.
My marauder shoots very well with H-4 and S-0 and adjust the valve half way (or your taste for shot count or flb)
What you are looking to do is for the first shots to start climbing and then to diminish so you can have a good curve and minimize the FPS spread.
Best setup for shot count for me was H-2 S-4 V-2 but thats very conservative on energy.
JSB Match Diabolo Exact King .25 Cal, 25.39 Grains
Tried 3200 fills, different Hammer spring and Striker settings.
Could not test accuracy wind was 25 mph with gusts to 35 mph
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Let me suggest a tripod for chrony stand, and record strings whilst you plink. Otherwise, the process will get expensive. As Sharpshot said, at that energy level you should get more than 16 shots with little velocity variability. BC also peaks in the mid-800’s for pellets so don’t push too fast. What is the goal? I am sure we can help you get there.
cheers,
Douglas