Can someone explain?
There is a thing in strelok called multi BC and it looks like this
What exactly does this do? Is it simply for guns with different power settings shooting the same ammo or can you use it like this:
Measure the BC at 25m
Measure the BC at 50m
Etc etc, the pellet will have a different speed at different range, so can you simply ad that in so the bc changes with the velocity? Or am I overthinking it?
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
It is going to take a while, but once I get around to it I will be sure to give feedback :fishinghole:
Nice! So I will measure BC/velocity at 10, 25, 50, 75, 100 and strelok should be spot on with the BC, cool
Yup must be spot on. Please post the results here
Nice! So I will measure BC/velocity at 10, 25, 50, 75, 100 and strelok should be spot on with the BC, cool
It’s for BC discovered at different ranges. Like in the video I made the BC is different at 50 yards compared to 100 yards so depending on the range you are shooting strelok will calculate drop bases on these numbers
Also interested to know.
if it’s for BC for different distances it’s great. But to enter the required data in that table, will have to invest lot of time n effort unless you have something like LABRADAR to read the fps from say 10 Yds to 100 Yds
BC changes as speed changes. Best BC is typically around 800 fps in airguns.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
I just have the free version as of right now and you can not add extra BC for correction. Looking forward to your results