Carbon Fiber TANKS & ACC’S help needed for what to get
First, I am not sure if I am posting to the right area if not point me to the right area for general questions and answers.
Iām looking into buying a CF tank along with all the necessary accessories for filling my gun and have not found a good site for reviews on equipment or advice on this topic all together. Considering you are dealing with high pressure SAFTEY is my #1 PRIORITY. So does anyone have any advice what CF tanks to look into along with hoses, fittings etc… for the best set up? Venturi, AirHog, Great White????
All Replies
Viewing 14 replies - 1 through 14 (of 14 total)
Just call him and tell him you got were sent there from the Yellow forum. He’ll do the rest.
But if you have the time, you might want to give Tim at Mac! a call, or look up mac-1 airguns on the net. I buy fro mJoe and he’s top notch, but the last tank I bought was from Tim, and was much cheaper. It was a Scott 4600psi 88cf bottle. Scott is the tops in the trade.
KnifeMaker
Well Joe it is!! What deal and price on the Yellow Form am I looking for? Is it the one from 2011 Memorial day? Thats the only one I found.
I think you will really like the Tiger Shark. Joe has quality tanks.
I work for a police department so I take it over to the fire guys and they fill it. I’ve found I shoot a lot more now that I’m not having to get a work out every time on the hand pump.
Nice setup otis. I odered a similar setup but a tiger shark tank. 71 cu ft. Cant wait. I got the local fd to agree to fill it up for a small donation to the coffee/fajita fund.
I have the 97 cu ft Great White with the full armor package. It has the quick disconnects and the strain relief on both ends of the hose. Having the quick connect on both ends is very convenient since you can disconnect your hose from the tank without using a wrench when not being used.
I had been using the Hill hand pump to fill my Condor which is not fun in August in Texas when its 105 degrees in the shade.
If you go with Joe, be sure to mention you got his prices from the Yellow forum and mention the price. You will get a better deal.
I bought a valve from him and paid the Yellow price but had to trade in my other valve, it rubbed me the wrong way a bit and i’ve since heard of other dealings of a similar nature.
That said I would purchase from him again. And plan to get his 96cuft tank without a valve.
If you are going to do it do it right.
Get the largest 4500psi tank (96cuft), the valve with the two gauges and the microbore 30″+ long fill line.
I have a 44cuft and it’s great for my rifles that only fill to 1500psi. But for my others (3000psi & 4500psi) it’s WAY TOO small. š„
Purchased a scuba tank yoke assembly for filling my talon tank from joe. Extremely good quality and fast shipping. Will give him more of my business in the future. Mdh
Joe Brancato has the best tanks out there and he is very helpful. You can’t go wrong with his tanks.
Thanks for the feed back! I will check out Joes site little more seriously.
Ronin Joe has the best quality stuff you can find from the research I have done. I hope to get a great white or similar one day. Lots of options with af. I almost went co2 but found another option. If money isnt a problem, seeems joe is the best choice.
Safety first, that’s why I bought from Joe.
http://airtanksforsale.com/
and it ain’t that dingy yellowed stuff.
and he carries a full line of ,compressorsin including the ShoeBox ā
Anyone have a email addy, for Joe Bracotas site, for this fine young lad?? Joe Brancoto’s phone # 714-907-0067, call anytime between 8 to 8 pacific time, this guy has the best stuff, remember to check and make sure you can fill to 4500psi before ordering a Great White
Viewing 14 replies - 1 through 14 (of 14 total)
- You must be logged in to reply to this topic.
My website is http://www.AirTanksForSale.com
Bottom line: I will always offer significantly better products for the same price, or so somewhat less, than what others charge.
Call any day between 8AM-8PM Pacific (11AM-11PM Easter) except Sunday morning.