Cleaning question, shroud unscrew?
Does the shroud unscrew from the barrel like a Cricket, I Know the end cap unscrews ,
I thought I would just clean the Mutant like the Cricket,
I could not get the shroud to unscrew for nothing.
Mike
All Replies
hum, that’s strange ?
Does yours look like this Donny ?
~ Greg
You have a different shroud then me GKU. Mike yours is probably like mine. You have to unscrew the 4 screws in the front ring bracket, then you can unscrew the shroud. My shroud actually has a long tip at the rear same OD as the barrel that is held by the first ring bracket.
The LDC can unscrews from here Mike, u might try to push the tip/front of the can over just a little bit to one side while turning it CCW.
Be carefully the baffles are a tight fit !
I clean them out with WD-40 or Ballistol, and then wash all of them out with liquid Dawn.
more here ….. http://www.talonairgun.com/forum/viewtopic.php?f=55&t=32703&start=80#p335291
~ Greg
- You must be logged in to reply to this topic.
yup but my nipple does not come off as easy as yours. Me and Mike probably weaklings then lol. But I tried for the longest time to get that thing off still can’t. I don’t want to mess up the threads.