Clipping problems in the Condor SS
Has anyone had any clipping problems with there Condor SS? I was just curious to see how many people have had this problem. By clipping I mean pellet flight path being interrupted by a baffel or washer in some way.
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
The first time I replaced he barrel in my condor it turned into a real mess. I ended up removing all the internal components, and when I tried to replace them I forgot to put the hammer weight back in. I also forgot to install the baffle stop screw near the end if the barrel, so I had one baffle on one side, and two baffles on the other. When I turned the gun you could hear the parts sliding around inside, and after shooting a few times I knew there was something wrong. I tore the gun down again, and found the wave washer bent nearly inhalf. So I just sent my gun back o airorce and they fixed it up to what it should be. That is the only time I’ve had trouble with the internals of my gun.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Had mine apart for the first time today. Inspected the baffles the wave washer and end cap. Everything was fine no clipping just a light buildup of lead powder and oil on the baffles. Just did this to check, I had no accuracy issues.